- Oct 06, 2018 -
Materials to Sew a Wool Felt Beret
Machine: BERNINA 350 PE
Fabric: 1/2 yard of Wool Felt
Lining: 1/2 yard of lining fabric (I used Bemberg Rayon)
Scissors or Rotary Cutter
Ruler or Tape Measure
Pen or Pencil
Hand sewing needles
Berets are traditionally made from wool felt. I found wool felt in the utility fabric section of my local fabric store. They carry a large selection of beautiful colors. You will only need about half a yard for this project. Keep in mind that the fabric will rest against your forehead and may be itchy and also, wool can be drying to your hair. This is why I chose to line my wool felt beret.
Here is how to create the pattern pieces for your wool felt beret:
Your beret pattern will have 2 pieces: The top of the beret and the underside of the beret. And each piece will have a quarter of an inch seam allowance.
To create the pattern for the top of the beret, which is simply a large circle, you will create a circle with a diameter (the distance across a circle) of 12″. I came up with this number because it’s even and this seems to be the standard size of ready to wear adult size berets, give or take a centimeter or so. Divide 12″ in half and which will give your 6″ (the radius of the circle) and this is the number you will set on your compass.
To create a pattern for the underside, we’re going to use the same circle for the top. Measure around your head with the tape measure — mine is 22″. The distance around your head will provide you with the circumference of the inner circle. The inner circle is the opening of the beret where your head will fit through. Here is how to calculate the radius of a circle:The radius is 3.5″. This is where you will set your compass to create your inner circle.
Just cutout the inner circle and use this to create both the top of the beret and the underside.
Cut out 1 beret top in fabric and 1 in lining. Cut out 1 underside of the beret in fabric and 1 in lining.
Cut out a strip of fabric .25″ wide and 2″ long. This is optional and will create the “stem” at the center of the wool felt beret.
With wrong sides together, fold the top of the beret in the fabric in half.
Then fold it in a fourth. Using a pen or pencil, make a mark at the point. This is the center of the top of the wool felt beret.
For the stem piece, overlap the ends.
Stitch the stem to the center of the top of the beret.
With right sides together, pin the underside of the beret to the top.
Stitch the seam using a .25″ seam allowance.
Flatten your seam with your iron on the proper heat setting.
Pin the top and underside of the lining fabric, right sides together.
Sewing with a .25″ seam allowance, also.
Reduce the inner circle by .25″, so that when it’s sewn to the wool felt beret it will give you a “turn of cloth” and the lining will not peek out.
With right sides together, pin the lining to the wool felt beret, leaving a 3″-4″ opening. Stitch using a .25″ seam allowance.
Turn to the right side.
Using needle and thread, slip stitch the opening closed.
And flatten your seam with your iron.
- Lycra Fabric And What Are They
- Fashion Processing Fabrics Modal
- What Is The Use Of Fleece Fabric Wi...
- Clothing Factory Processing A Varie...
- Clothing Processing Placket Which P...
- Women's Processing Plant For The Cu...
- What Is The Way Of Washing Silk Dress?
- Talking About The Classification Of...
- Clothing Processing In The Types Of...
- Clothing Processing Steps In The Pr...
- 10 Free Beret Crochet Patterns
- History Of Fedora Hat
- Can You Be A Green Beret?